Construction
 | 3D GPSTopcon's 3D-GPS+ system has the ability to track both GPS and GLONASS. |
 | 3D LPS3D-LPS is the world's first local positioning system. It works right from the site plans in your computer. |
 | 3D-Office3D-Office™ allows you to create, edit, import/export, design and prepare files for any jobsite. |
 | 3DXiThe Topcon 3DXi provides the operator with all the information needed to expedite excavation tasks. |
 | FC-100The FC-100 field controller incorporates the graphical Windows® CE operating system on a crisp, bright, colour touch screen display. |
 | FC-2000The FC-2000, represents the most powerful controller combinations in the industry. |
 | LS-B100Fast to set up and easy to use, this affordable depth control sensor can be mounted to your equipment and working in minutes. The LS-B100 is a low cost grade indicate solution that makes any operator more productive. |
 | LS-B10WThe advanced LS-B10W offers built-in wireless technology and CANopen (Controller Area Network) connectivity to provide the ultimate in communications flexibility. |
 | LS-B110With the added slope and plumb indicators, your rading and excavating accuracies are tighter than ever with Topcon's LS-B110. |
 | LS-B110WThis is a laser sensor with a wireless remote display. It is loaded with all the time saving features as the other LS-B units. This equipment offers the total solution in grade management. |
 | LS-B2The versatile LS-B2 works easily with any machine so you only need one receiver for any job. |
 | Pocket 3DPocket-3D simplifies data collection, allowing you to to check cuts and fills, layout points and survey all or part of the jobsite. |
 | System 5System Five is a complete machine control package. It is configured to almost any machine, and may including our advanced single, dual, or 3D control box. |
 | TopSITETopSite is a CAD-based software program capable of designing an entire project or for 3D site simulation to check for errors in the design file. |
 | Slope Meter "SSM" Steep Slope MeterThe Steep Slope Meter combines the features of the "No. 1" and the "No. 2NS". The "SSM" is used to determine "percent of grade" and is calibrated to read from 0-50%. The "SSM" is used in applications where a steeper slope reading is required (as compared to the "No. 2NS"), but the operator or engineer requires a reading in "percent of grade". This product works well on bulldozers and similar equipment. |
 | Slope Meter No.1Used for all slope and crown construction. The figures shown on the scale represent slope. For example, when the indicator ball is over number "8", it indicates an "8-to-1" slope. The small triangles (shown between 0 and 8) represent degrees, for reference purposes. Slope-Meter "No. 1" is widely used on motor graders, bulldozers, and similar equipment. |
 | Slope Meter No.2 NSUsed to determine "percent of grade" and is calibrated to read from .00 to .12 (0-12%). The "No. 2NS" aids the operator and speeds work on motor graders, asphalt pavers, wheel ditches, tunneling machines, and other equipment where exacting specifications are required. The "No. 2NS" is installed at the factory by leading equipment manufacturers. |
 | Slope Meter, Safe Curve Speed IndicatorThe safe driving speed for any curve is quickly and accurately determined with the "SCSI" mounted in the engineer's car. The scale reads zero when the car is level, and will show "tilt" up to 25 degrees on each side. The scale is red beyond +/-10 degrees to denote danger zones. The "SCSI" was designed by Slope-Meter in accordance with the specifications of the Minnesota Highway Dept. Traffic Division and is used nation-wide by highway and traffic engineers. BROCHURE ON ALL SLOPE METERS. |
