Blog - Latest News

With 14 decks, the Italian-made Costa Concordia cruise ship was a gargantuan-size vessel by any accounts. It measured 290 metres long, 35.5 metres wide, and weighed 114,500 tons. It was the biggest of a half-dozen “dream class cruise ships” owned and operated by Costa Crociere, a subsidiary of Carnival Corporation and Carnival plc.

Unfortunately, on January 13, 2012, one of Europe’s largest cruise ships and the largest Italian cruise ship ever built, the Costa Concordia struck a rock in the Tyrrhenian Sea just off the shore of Isola del Giglio, near the western coast of Italy. This accident tore a 49-metre-long gash in her hull. With water flooding in and listing, the capsized cruise ship drifted back to Giglio Island, where it grounded, lying on her side in shallow water on an underwater ledge with much of the vessel’s structure above water, but in danger of shifting and sinking due to a nearby drop off in the ocean floor. The damaged ship came to an uncertain rest.

Local authorities with the Italian Civil Defense, who lead the rescue operations, contacted land surveyor Mauro Alessandroni and charged him with the task of monitoring possible minute movements of the ship. They wanted to prevent danger to the rescue teams who were searching for survivors still stuck inside the wreck.

Less than two days after the catastrophe, during the urgent search efforts, Alessandroni initiated the checking stage for movement of the wreck by using an optical-mechanical total station, installing two prisms on the ship, one on the prow and the other on the stern. For triangulation, two additional prisms were placed on nearby land.

In the following days, he performed manual measurements every 15 minutes. Alessandroni recorded the data, downloading it into calculation software to determine any movements.

Recognising the urgency of the need and knowing that there is a less labour intensive, reliable alternative, Geotop Ltd., based in Ancona, Italy, offered Alessandroni an alternative – the Topcon QS Quick Station robotic total station.

The QS robotic system offers the unique one-touch, Quick-Lock feature and dual laser integration, which is designed to expand remote control coverage in order to speed up prism search and lock operations. The new robotic total station automated the data acquisition and provided a link to a remote computer, which improved the reliability of data quality and the ability to monitor any movements of the ship.

On January 18, five days after the catastrophe, Alessandroni brought the Topcon QS to Giglio Island. There was no location where a stable concrete or steel pillar could be set, therefore a tripod was used. A checkpoint was established on a sailing boat moored inside the harbour at a distance of about 800 metres away.

Additionally, to ensure that Alessandroni was getting the most from the Topcon system, a meeting was held which included Geotop Monitoring Technical staff, led by Giuseppe Perrucci, Geotop deputy technical manager. It was decided that the:

  • Topcon QS Total Station was performing at the required accuracy.
  • Polifemo Monitoring Software, from Geotop’s subsidiary, Geopro Software House. Polifemo consists of two parts: the Acquirer, which can record data with a pre-set frequency or set on continuous, and the Monitor, which receives in real time the information from the Acquirer, and can also use the data for charts, analysis and studies. It was decided to:
    • Mount the Polifemo Acquirer software onboard the QS Total Station
    • Install the Polifemo Monitor on Alessandroni’s PC (with Windows XP OS) located on the boat moored in the harbor.

The communication system selected was a Satel Satelline radio modem, connected via RS232 to the total station, powered by a 12 v, 12Ah battery,

  • that also powers the total station and that is installed in a waterproof box that was named “IRIS.”
  • An AC/DC connected to the power unit charges the battery of the IRIS.
  • The total station is mounted onto a tripod with the legs all lowered and braced by a rope secured to the ground.
  • On the boat another IRIS Kit was installed, same as the one described above, connected to the PC via a USB cable.

Alessandroni reports that the installing operations for the Topcon technologies were carried out without difficulties and according to the business plan. Particularly important has been the Polifemo software feature that  automatically generates graphical reports of single or grouped points hysteresis, according the X, Y, Z, XY, XYZ components. These reports were required by the department of Civil Defense.

The monitoring is still being performed and is expected to continue for several months, until people researching the cause of the catastrophe are no longer on the wreck.

There are still many question as to why the Costa Concordia cruise ship, which had departed from Rome and was heading toward the northern coast of Italy had changed course to pass near Giglio island. The thought was that the captain wanted to give both passengers and islanders a visual treat. The tragedy claimed 32 lives of the 3,229 passengers and 1,023 crew who were on the huge ship.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

Need something else?

If you can’t find what you’re looking for or  you have a unique project you’d like to discuss with us, please drop us a note and we’ll  be in touch!

Sign up to our e-news!