FlatMesh Temperature Sensor Node

  • Steel structures
  • Rail, for critical rail temperature alerting
  • Concrete structures, including during curing
  • Heating, Ventilation, and Air Conditioning (HVAC) systems
Request more information about this product
Categories:

Description

The PT100 RTD Sensor Node allows for precision temperature monitoring using a variety of sensors. It uses the integrated radio transceiver to report its measurements through Senceive’s wireless communications network to a Gateway.

Key Benifits

  • Waterproof, robust connectors for simple installation
  • Accuracy of 0.1°C
  • Can have -IX triaxial tilt sensor integrated for combined tilt and temperature sensing in one unit
  • Integrated long life battery
  • 12-15 year battery life, including when acting as a relay node within the mesh communications network
  • Versatile mounting options
  • Waterproof to IP66 / IP67 / IP68
  • Firmware is remotely upgradeable over the air via the gateway reducing costly site visits

Specifications

Channel Combination

Model Ports Applications
FM3N-RTD 1 PT100 RTD Channel Single point temperature monitoring
FM3N-IX-RTD 1 PT100 RTD Channel
1 Integrated high precision triaxial tilt sensor
Structural monitoring with precision temperature compensation
Railway deformation and critical rail temperature monitoring

 

Physical Specification

Parameter Value
Dimensions excluding antenna and vent 90 x 90 x 60 mm
Dimensions excluding antenna 90 x 96 x 60 mm
Total Mass 0.57kg
Housing Material Die cast aluminium
Protection
(BS EN 60529: 1992 + A2: 2013)
IP66 / IP67
IP68 at 1m for 24 hours
Mounting Options M4 blind holes in side
¼” UNF holes in bottom
Operating Temperature Range -40°C to +85°C

 

FlatMesh Radio Specifications

Parameter Value
Communication Type Proprietary FlatMesh v3 Mesh Networking
Protocols
IEEE 802.15.4 compliant
Frequency Band 2400 – 2485 MHz ISM Band
Maximum Transmit Power
(EN 300 328 v1.8.1)
6.5dBm
Maximum Permitted Antenna Gain 2.2dBi
Range Up to 300m depending on the environment and fitted antenna
Consult with Senceive for your application
RF Module Senceive FM3Node

 

RTD Interface

Parameter Value
Connector M12 Female
5-pole A-coded
Screw-in Type
Accuracy < 0.1°C
Resolution < 0.01°C
Temperature Range < -40°C to >85°C
Stimulus Type Constant Current

 

Tilt Sensor (-IX Variant Only)

Parameter Value
Resolution 0.0001° (0.00175mm/m)
Repeatability ±0.0005° (0.0087mm/m)
Range ±90°

 

Internal Battery

Parameter Value
Battery Type Lithium Thionyl Chloride
Nominal Voltage 3.6V
Nominal Capacity 19000mAh
Typical Battery Life 12-15 years at 20/30 minute reporting intervals, including when acting as a relay node
Consult with Senceive for your application

Downloads

Brochure

Video

Watch to find out more

Reviews

There are no reviews yet.

Be the first to review “FlatMesh Temperature Sensor Node”

Your email address will not be published. Required fields are marked *