How To Videos

In this How To video, Position Partners shows you how to Transfer the completed Road Design to Survey as well as merging the road design with the existing surface and view the result in 3D Viewer.

In this How To video, Position Partners shows you the various Volumes options in Roads and how stripping, subgrade and cut/fill is calculated and displayed in the report.

In this How To video, Position Partners shows you how to create and apply Templates within the Roads View module plus apply subgrades and Compute Volumes to get a balanced earthwork volume.

In this How To video, Position Partners shows you how to Extract Cross Sections using the three options for extracting.

In this video, Position Partners shows you various methods on how to Insert and modify Profile IP’s within the Roads Module.

In this video, Position Partners shows you how to create multiple Design Surfaces within the Roads View module allowing the designer to choose the most suitable design.

In this video, Position Partners shows you how to create a Title Block from an imported AutoCAD dwg and editing an existing Title Block template.

In this video, Position Partners shows you how to create and use a full backup of the software, settings, licence and job data using Magnet Field 5.0.

In this video, Position Partners shows you how to use the Topcon hybrid positioning system via the resection and automatic localisation routine using Magnet Field 5.0.

In this video, Position Partners shows you how to use the set collection routine to conduct a field traverse using Magnet Field 5.0.

In this video, Position Partners shows you how to setup a total station for LPS machine control using Magnet Field 5.0.

In this video, Position Partners shows you how to use the Topcon hybrid positioning system via the resection and RTK routine using Magnet Field 5.0.

In this video, Position Partners shows you how to use the Topcon hybrid positioning system via the backsight and RTK routine using Magnet Field 5.0

In this video, Position Partners shows you how to use the Topcon hybrid positioning system via the backsight and automatic localisation routine using Magnet Field 5.0.

In this video, Position Partners shows you how to use the new customise toolbar options in map, topo and stake routines using Magnet Field 5.0.

In this video, Position Partners shows you how to use the new correct base routine for conducting site calibrations using Magnet Field 5.0.

In this video, Position Partners shows you how to use the new compass and cross section overlay when staking out in map view using Magnet Field 5.0.

This video focuses on Magnet Field and how the user can extract their photos taken in the field and get a usable image file from it.

In this video Position Partners shows you how create road templates in Magnet Field and generate cross section reports in Magnet Office.

In this video, Position Partners shows you step-by-step how to conduct a monitoring survey using the monitoring routine feature in MAGNET Field and MAGNET Tools.

In this video, Position Partners shows you step-by-step how to conduct a monitoring survey using the monitoring routine feature in MAGNET Field and MAGNET Tools.

In this How To video, we guide you step-by-step through the process of calibrating tilt sensors using Topcon’s HiPer HR integrated GNSS receiver

In this short How To Video, we walk you through the steps to install the latest version of MAGNET software, version 4.

Watch this short video that explains data and job preparation using Magnet Field 3.2.

Watch this short video that explains how to upload data and time card completion using Magnet Field 3.2.

Watch this short video that focuses on the Stake Slope routine in Magnet Field 3.2.

Watch this short video that explains how to use the stake surface option in Magnet Field 3.2.

Watch this short video that explain the stake road option in Magnet Field 3.2.

Watch this short video that explains how to use stake real time road routine using Magnet Field 3.2.

Watch this video that explains how to use the traverse routine with closure and adjustment using Magnet Field 3.2.

Watch this short video which explains how to set up hybrid for RTK using Magnet Field 3.1.

Watch this short video which shows how to use the hybrid function in Magnet Field 3.1 using a Garmin GPS.

Watch this short video to see how you can copy survey configurations from device to device in Magnet Field 3.1

Watch this short video to see how you can customise your stakeout reports in Magnet Field 3.1

Watch this short video which demonstrates how to complete a WGS84 localisation in Magnet Field 3.1

Watch this short video to find out how to activate a new license in Magnet Office.

Learn how to Stake Reference CL with MAGNET Field V3.0 in this short How To Video by Position Partners

Watch this video and learn how to check and adjust a tilt sensor on a PS or DS Total Station.

Time saving option that starts with a common PDF file containing design information and then quickly importing into MAGNET Office software. An intuitive workflow is then available to selectively task the software to convert the PDF file into usable linework. After some quick clean up using MAGNET Office, upload a single file to a secure cloud-based Project for immediate download by mobile users standing at an active jobsite for immediate layout with MAGNET Field data collection software.”

Learn how to adjust your base or rover to the local grid using MAGNET Field

In this video, learn how to configure MAGNET Field for the Topcon PS robotic total station and RC5

In this video, learn how to setup MAGNET Field RTK

Learn how to reorganise and customise your MAGNET Field home screen and menu structure in this short How To Video by Position Partners

Sign up to our e-news!

Sign up to our e-news!

Visual CAPTCHA

Proud to be partnered with:

Quantum Systems
Agisoft
GKD
Klau
Intel
Teledyne Optech
Topcon 1
Bentley
iDig
Senceive FlatMesh
Z+F
Blue Electronics
MAVinci
AscTec
Global Mapper
iSeekplant
AviAssist
RDS Technology
Topcon 2
Bentley1
MAGNET
Carlson
ClearEdge 3D
Topcon
US Radar
Sokkia
Juniper Systems
Panasonic
Pix4D
DynaRoad
Metashape
Virtual Surveyor
iVolve
aLine
Website Development Brisbane | Admin | © 2019 Position Partners